| Choose language: English | Italiano | Français |
home | legal | contact us |
|
||||||||
|
|||||||||||||||
|
|||||||||||||||
|
|||||||||||||||
|
|
|
||||||||||||||
 TPV Injection Moulding
|
| Gates and Runners: | Fully round allowing easy flow |
| Venting: | 0.02 - 0.05mm deep at final fill point |
| Injection Speed: | Medium - Fast |
| Injection Pressure: | Medium |
| Back Pressure: | Low - Medium |
| Holding Pressure: | Sufficient to pack the mould |
| Cooling: | Parts can be demoulded once temperature drops to approx. 100°C |